Basic Inverter Circuit using Transistors

basic-simple-inverter-circuit-using-transistor-transformers
Basic Inverter Circuit

Inverters play a significant role on a global scale as it provides uninterrupted power supply and also help people to meet the energy demands.You might have used a ready made inverter produced by a manufacturer but how about making one by your own.This article will describe you how to make a simple inverter circuit using transistor which convert 12V DC to 120V AC using some basic electronic components such as Transistors and transformers.

INVERTER CIRCUIT USING TRANSISTOR:

The transistors in the above circuit holds the most significant part in the working of this circuit where it was wired as a Multivibrator.This part of the circuit provides the continuous square wave pulses needed for its working.The above circuit is known as Digital inverter since obtained output wave was a square wave.

The frequency of the above pulse depends on the values of Resistors and capacitor connected to it.The above circuit was designed to generate optimum frequency so its best not to change these values .A diode HEP 154 was used to offer protection to the components used in the above circuit.

The Transistor 2N3055 can handle 15 Amps each , you can also use high current transistors if you thought of upgrading this circuit.A 24V center tapped transformer was used and you can substitute it with powerful transistors to deal with high current.The above circuit could supply power of about 300 watts and you can increase it by using high rated transformers and transistors.

Tantalum capacitors must be used here , use of regular electrolytics will overheat and explode.Since you are dealing with high voltages it is advised to use  fuse along with this.Your battery must not go dead since this circuit consumes large amount of current.


6 Comments

  1. Henry

    Is T1 the DC input?If yes, please enlighten me on the AC output.I can't find it on the diagram.If the primary of the transformer gives 220vac, directly then, I don't see the need of the transistors.

    Reply
    1. Frank Donald Frank Donald(Post author)

      That's the output stage not the input one.You can see the input voltage of 12v DC marked above the transistor Q2.The transformer steps up the voltage from 12v to 220v AC.

      Reply
  2. Henry

    Please can you send the link for this video download?

    Reply
    1. Frank Donald Frank Donald(Post author)

      Henry,
      What video you are referring to ?

      Reply
  3. Henry

    What's that component like a Triangle which has 12v value in your circuit?

    Reply
    1. Frank Donald Frank Donald(Post author)

      Diode.

      Reply

Leave a Comment

Your email address will not be published.Required fields are marked*

Baidu
map