Tutorial on printing image in Graphical LCD (GLCD) using Atmega32

Printing Image in GLCD

Graphical LCD's known as GLCD are display devices which are capable of displaying graphical images, customized characters, etc.This paves way for any system to present information to the end user by means of interactive graphics such as printing image.188bet服务官网Bored of using the old 16×2 LCD displays, then you should probably try this one to make your projects more interactive.

This tutorial focused to teach you about printing a simple picture in this GLCD using AVR ( Atmega32) Microcontroller.

PRINTING IMAGE IN 128 x 64 GLCD:

GLCD Pin diagram

This GLCD consists of 128 columns and 64 rows in it which are divided in two equal halves.Similar to 16×2 LCD this LCD consists of 8 data pins from (DB0-DB7) and other control pins.Read the completeworking of GLCDbefore you move into the coding section of this tutorial.

EXPLANATION:

We all know that every picture is made up of basic blocks called as pixels and we are going to use that to our desired picture in this GLCD.But this GLCD will not support any colors so we have to prepare the image before printing it into this Graphical display.Since this device only supports 128 x 64 resolution we have to resize our image into the resolution 128 x 64.

After that as i said before these LCD will not support colors, so you have to change your image have Monochrome Bitmap format and you will finally get a black and white image So your final processed image will look like the one below.

Monochrome image

Now you have to assign the each pixel value into an array in your code which will make the image to print in your GLCD.Not to worry a tool known as "Graphic LCD bitmap generator" from Mikrocelectronica will help you to finish your job.

Snapshot of Bitmap Generator

This is a screenshot taken of the Bitmap generator, all you have to do is load your processed image in this application and it will automatically generate the pixel values of the image give the output as array values as you see in the screen shot.You can also invert the pixels if you think that the picture is not good enough to be printed.Now you have to copy the code and place it in your source code of your microcontroller.

You can download the Bitmap generator applicationhere.Not to worry if it doesn't support for you, there are plenty of similar software available online.

CODE:

#include
           
            #define F_CPU 8000000UL  #include
            
             void glcd_picture(const unsigned char *)!void select_chip(int)!int i!unsigned char photo[1024]={"Your image Array here"}!Your image pixels     void glcd_int()!void glcd_data(unsigned char)!void glcd_cmd(unsigned char)!void glcd_cmd(unsigned char cmd) //subroutine for command   {     PORTC=cmd;      _delay_ms(2)!PORTD&=~(1<<2)!PORTD&=~(1<<1)!PORTD|=(1<<0)!_delay_ms(2)!PORTD&=~(1<<0)!}     void glcd_data(unsigned char dat)  //subroutine for data   {     PORTC=dat!_delay_ms(2)!PORTD|=(1<<2)!PORTD&=~(1<<1)!PORTD|=(1<<0)!_delay_ms(2)!PORTD&=~(1<<0)!}     void glcd_init()                //subroutine for initialaization  {    unsigned char command[4]={0x10,0xb8,0x40,0x3f}!select_chip(1)!//Chip selection    for(i=0;i<4;i++)    glcd_cmd(command[i])!select_chip(0)!for(i=0;i<4;i++)     glcd_cmd(command[i])!}     void select_chip(int chip)    //Chip selection   {    if(chip==1)     {        PORTD|=(1<<4)!PORTD&=~(1<<3)!}    else     {        PORTD&=~(1<<4)!PORTD|=(1<<3)!}  }     void glcd_picture(const unsigned char *ip)  //Subroutine for printing   {     int page,column!for(page=0;page<8;page++)  {    select_chip(0)!glcd_cmd(0xb8|page)!glcd_cmd(0x40)!for(column=0;column<128;column++)       {  if(column==64)  {   select_chip(1)!glcd_cmd(0xb8|page)!glcd_cmd(0x40)!}  glcd_data(*ip++)!//acessing array values using pointers      }         }    }     int main(void)  {    DDRC=DDRD=0xff!_delay_ms(2)!PORTD&=~(1<<5)!_delay_ms(10)!PORTD|=(1<<5)!_delay_ms(2)!while(1)     {      glcd_init()!//initialization      _delay_ms(1)!glcd_picture(photo)!//Printing image pixels      while(1)!}  }
            
           

NOTE: